Single Toilet
Description
The Portable Single Toilet Block offers a versatile solution for outdoor bathroom needs, suitable for both permanent and temporary installation. Built with a structural steel frame and 50mm insulated EPS panels, it ensures long-term durability and a climate-controlled interior.
The unit includes an integrated exhaust fan for effective ventilation and can be seamlessly connected to mains power, water, and sewerage. Ideal for events, construction sites, and remote settings, this range is also available as a Double Toilet Block for enhanced capacity and efficiency.
Single Toilet
$3,848.00
Product Information
Structure & Frame
Main Frame
Heavy-duty galvanised steel frame
Coating
Zinc-rich primer and epoxy finish
Compliance
Engineered to Australian Wind Rating standards
Windows & Doors
Windows
Aluminium framed windows
Glazing
Double-glazed toughened glass
Entry Doors
50mm EPS entry door
Exterior Walls & Roofing
With Cladding
50mm EPS panel walls & 20mm cladding
Without Cladding
50mm EPS panel walls
Roofing
Steel cladding outer and 50mm EPS sandwich panels
Interior Walls
Interior Walls
50mm EPS panel
Electrical
Electrical
All electrical components and wiring are tested to meet Australian standards.
Internal Lighting
Pre-fitted, low-draw round LED lights
Main Point
A 2.5mm 3-core cable exits the rear of the unit, providing a ready-to-use point for site-to-grid connection
Plumbing
Cold
Cold brass connectors are pre-fitted through the wall for easy onsite connection
Greywater
40mm PVC outlet for sinks and showers
Blackwater (Waste)
110mm(125mm)PVC outlet for toilet waste
Rear Exit Point
All plumbing lines exit from the center-rear of the unit for a clean, streamlined installation
Flooring
Sub Floor
12mm PVC flooring
Top Layer
2mm thick timber-look vinyl covering
Installation
Instructions
Detailed installation manuals provided
Footing Plans
Footing Plans supplied . Level site and footings prepared by customer
Electrical & Plumbing
we strongly recommend engaging qualified tradespeople to carry out any plumbing and electrical work.
Transport
Crane Truck
The truck unloads using its own integrated crane.Typically requires 2m–6m clearance from the side of the truck tray for safe setup and positioning
Tilt-Tray Truck
The unit carefully slides off the rear of the tray onto the ground，requires 10m–15m of straight-line clearance behind the truck to slide, unload, and drive away.Good site maneuverability and clear access paths are essential
Rigid Truck
The customer is responsible for organizing an on-site forklift or external crane for unloading.
This option is often used for long-distance transport where local unloading equipment is available
Floor & Electrical Plans
